Go Fast Seminar 1
Boat Preparation Prior to Start

by Jim Maloney - Great Pumpkin

  1. Boat Preparation critical in every class.
  1. Bottom Prep - as important as good sails.
  2. Deck Layout - Simple is best
    All you need is:
    1. Spinnaker Halyard stowage shackle on port side with release line led to starboard rail.
    2. Twingers - forward so you don't need foreguy.
    3. Foredeck Hatch - Spinnaker Bag Very Important!
    4. Jib Tracks - rail, two sets for #3, and long middle one for the #2 and #1.
    5. Topping Lift on Harken Swivel cleat between mast and shrouds on starboard side.
    6. Two winches for sheets (same winches can also help with halyards).
    7. Harken ratchets for spinnaker sheets.
    8. Backstay led to both sides.
    9. Traveler with "auto release".
    A clean deck creates a boat which is easier to crew on and improves boat handling (tacks, jibes, sets, douse).
  3. Mast & Boom
    Mast - All halyards should be cleated on Mast, Spectra Main and Jib (Light weight) and kevlar or spectra for spin halyard.

    Mast Tuning - Will Baylis' Article is still a good guide.
    If you're not a rocket scientist, like me, use one setting for all conditions and learn how to fool the boat.

    1. Rake - Headstay length - Will's number works - check other boats
    2. Uppers - tight
    3. Forward lowers - 150 lbs. less than uppers
    4. Aft lowers - tight - invert mast slightly - helps keep headstay tight so you can point - loosen it in light slop.
    5. Backstay - lots of purchase so you can crank it on, in a breeze, to blade main. Given limited space to work, the backstay should be a little short so it's hard to attach with everything slack.

    When the rig is tuned right, the mast is straight sideways and the tip is in the middle, with a slight aft inversion.

    Boom - Flattener at mid-boom so trimmer can adjust. Also add shock cord to keep tail up and out of crew's way.

  4. Weight
    Strip boat of everything you can, legally, and within reason.
    1. remove wires from hull and mast
    2. remove battery
    3. porta potty
    4. useless sails
    5. VHF - Loran - Stereo
    6. running lights
    7. replace aft bunks with mesh

    Basically - before you load your boat with your personal gear - food - beverages, the boat should only have an anchor and chain as required by class rules, life jackets, sails (1,2,3,S,M), lines, deck hardware, and a paddle for no wind, a bucket for the ladies, and bumpers for docking.

    Placement- When racing place all weight over keel on cabin sole.

  5. Good Sails
    Buy what the majority of the leaders are using
  6. Maintenance
    Check gear on a regular basis.
    There is nothing worse than losing a race, or places on the course, due to gear failure.

Summary

Proper Preparation - Boat handling improves
Tacks, jibes, sets, and douses, all become easier, faster and smoother

Less Variables-
Allows you to concentrate on how to get your boat around the course as fast as possible, by focusing on sail trim, steering, tactics.

Practice-
The more you sail as a team, the better you will get.
It takes all 4 or 5 crew to sail.

Copy-
Copy the boats that are winning races. Don't spend time trying to recreate the wheel.

Simple is better-
Once you've made the initial investment of time and money, should pay dividends.
Easier to retain crew